Insert Tee, Lead Free, .75 x .75 x .5-In. Brass Barb

Description

3/4″ x 3/4″ x 1/2″, lead free brass barb insert tee, to make a 1/2″ branch from a 3/4″ run of cross link polyethylene pex tubing, secure the 1/2″ barb end of fitting to 1/2″ pex pipe with tv #608-933 cinch clamps & tv #608-743 cinch tool, or copper crimp rings & crimp tool, secure 3/4″ barb ends of fitting to 3/4″ pex pipe with tv #608-826 cinch clamps & tv #608-743 cinch tool, or copper crimp rings & crimp tool, immediately testable to well over 100 psi, meets the new nsf/ansi standard 14-2009 & astm f 1807-9si standard for products intended for the transport of potable water, ansi/nsf standard 61 annex g for lead free compliance & the wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight to meet ab1953 California & vt s152 Vermont low lead restrictions.